Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
204
To create the multicast_range Trinity:
DGS-3600:4#create multicast range Trinity from 224.19.62.34 to 224.19.62.200
Command: create multicast range Trinity from 224.19.62.34 to 224.19.62.200
Success.
DGS-3600:4#
delete multicast_range
Purpose Used to delete a range of multicast IP addresses that will be specified
under a given name.
Syntax
delete multicast range [<range_name 32> | all]
Description This command will delete a multicast range that was created with the
create multicast_range command.
Parameters <range_name 32> - Enter a name of up to 32 alphanumeric characters
that will be used to identify this multicast range to be deleted.
all – Use this parameter to delete all multicast address ranges
configured on the Switch.
Restrictions Only administrator-level users can issue this command.
DGS-3600:4#delete multicast range Trinity
Command: create multicast range Trinity
Success.
DGS-3600:4#
show multicast_range
Purpose Used to display a range of multicast IP addresses that are specified
under a given name.
Syntax
show multicast range [<range_name 32> | all]
Description This command will display a multicast range that was created with the
create multicast_range command.
Parameters <range_name 32> - Enter a name of up to 32 alphanumeric characters
that will be used to identify this multicast range to be displayed.
Entering this command without the specified range_name will display
all multicast ranges created on the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display the multicast range Trinity:
DGS-3600:4#show multicast range Trinity
Command:show multicast range Trinity
No. Name From To
----- ----------------------- ---------------------- ----------------------------
1 Trinity 224.19.62.34 22419.62.200