Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
251
show flow_meter
Purpose Used to display the ACL flow meter parameters set on the switch.
Syntax
show flow_meter {profile_id <value 1-14> {access_id <value 1-
128>}}
Description This command will display the flow meter parameters set on the
switch.
Parameters profile_id <value 1-14> - Enter the profile ID of the ACL entry to be
viewed for flow metering.
access_id <value 1-128> - Enter the access ID corresponding to the
ACL entry to be viewed.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable the sFlow function:
DGS-3600:4# show flow_meter profile_id 1 access_id 1
Command: show flow_meter profile_id 1 access_id 1
Profile ID : 1 Access ID : 1 Mode: trTCM
CIR: 1000(64kbps) CBS: 200(Kbyte) PIR: 2000(64kbps) PBS : 200(Kbyte)
Action:
Conform : Permit Counter : Disabled
Exceed : Permit Replace DSCP: 21 Counter : Disabled
Violate : Drop Counter : Disabled
Total Entries : 1
DGS-3600:4#