Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
62
show boot_file
Parameters unit <unit_id 1-12> - Select the switch in the switch stack where the
boot file is located, denoted by unit ID number.
all – Enter this parameter to display the boot files on all switches in
the switch stack.
Restrictions Only administrator-level users can issue this command.
Example usage:
To rename a file:
DGS-3600:4#show boot_file
Command: show boot_file
Boot up image: C:/RUN.HAD
Boot up Configuration file: C:/STARTUP.CFG
DGS-3600:4#
show storage_media_info
Purpose Used to view flash memory information on the Switch.
Syntax
show storage_media_info {[unit <unitid 1-12> | all]}
Description This command will display information regarding the internal flash
memory of the Switch. This command will display the following
information:
Drive: The name of the drive of the storage media accessory.
Media_Type: Description of the type of storage media accessory
currently in use.
Size: Description of the size of memory space available on the
storage media accessory.
Label: Description assigned to this storage media accessory.
FS_Type: Description of the type of format of this storage media
accessory.
Parameters unit <unit_id 1-12> - Select the switch in the switch stack where the
storage media information is located, denoted by unit ID number.
all – Enter this parameter to display the storage media information
on all switches in the switch stack.
Restrictions None.
Example usage:
To view the storage media accessory information:
DGS-3600:4#show storage_media_info
Command: show storage_media_info
-----------------------------------------------------------------------------
Drive Media_Type Size Label FS_Type
C: Flash 16MB FLASH-A FAT16
-----------------------------------------------------------------------------
DGS-3600:4#