Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
321
DGS-3600:4# create pim register_checksum_include_data rp_address 11.1.1.1
Command: create pim register_checksum_include_data rp_address 11.1.1.1
Success.
DGS-3600:4#
delete pim register_checksum_include_data
Purpose Used to disable the RPs that the Switch will send Register packets to
and create checksums to be included with the data in Registered
packets.
Syntax
delete pim register_checksum_include_data rp_ address <ipaddr>
Description This command will disable the RPs that the Switch will send Register
packets to and create checksums to be included with the data in
Registered packets. This command is for PIM-SM configurations only.
Parameters rp_address <ipaddr> - Enter the IP address of the RP that will
discontinue sending Register packets to and create checksums to be
included with the data in Registered packets.
Restrictions Only administrator-level users can issue this command.
Usage example:
To delete RPs that the Switch will send Register packets to and create checksums to be included with the data in Registered
packets:
DGS-3600:4#delete pim register_checksum_include_data rp_address 11.1.1.1
Command: delete pim register_checksum_include_data rp_address 11.1.1.1
Success.
DGS-3600:4#
show pim register_checksum_include_data_rp_list
Purpose Used to display RPs that the Switch will send Register packets to and
create checksums to be included with the data in Registered packets.
Syntax
show pim register_checksum_include_data_rp_list
Description This command will display RPs that the Switch will send Register
packets to and create checksums to be included with the data in
Registered packets. This command is for PIM-SM configurations only.
Parameters None.
Restrictions User Account Command Level – All
Usage example:
To show the RPs that the Switch will send Register packets to and create checksums to be included with the data in
Registered packets: