Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
221
create 802.1x user
Purpose Used to create a new 802.1x user.
Syntax
create 802.1x user <username 15>
Description The create 802.1x user command is used to create new 802.1x users.
Parameters
<username 15> − A username of up to 15 alphanumeric characters in
length.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To create an 802.1x user:
DGS-3600:4#create 802.1x user dtremblett
Command: create 802.1x user dtremblett
Enter a case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DGS-3600:4#
show 802.1x user
Purpose Used to display the 802.1x user accounts on the Switch.
Syntax
show 802.1x user
Description The show 802.1x user command is used to display the 802.1x Port-
based or MAC-based Network Access control local users currently
configured on the Switch.
Parameters None.
Restrictions None.
Example usage:
To view 802.1X users currently configured on the Switch:
DGS-3600:4#show 802.1x user
Command: show 802.1x user
Current Accounts:
Username Password
-------------- --------------
Darren Trinity
Total entries: 1
DGS-3600:4#
delete 802.1x user
Purpose Used to delete an 802.1x user account on the Switch.
Syntax
delete 802.1x user <username 15>
Description The delete 802.1x user command is used to delete the 802.1x Port-
bdMAC
bd
Nt kA t ll l tl