Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
61
DGS-3600:4#dir c:
Command: dir c:
Current Directory: C:\
File name Size(byte) Update time
------------------ ----------------------- -----------------------
ABC 2678500 bytes 2006/06/20 18:57
LOG.TXT 520124 bytes 2006/07/27 16:56
STARTUP.CFG (*) 11007 bytes 2006/07/27 16:24
RUN.HAD (*) 2678500 bytes 2006/07/27 16:25
----------------------------------------------------------------------------------------------
Total files 4 files
Total free size 9293625 bytes
System reserved flash size 2097152 bytes
‘*’ means boot up section
DGS-3600:4#
copy
Purpose Used to copy a file.
Syntax
copy {<drive_id>} <pathname 64> {{unit_id 1-12>} <drive_id>}
Description This command is used to copy a file from a source location and
paste it to a host location. This command is only operable for the
storage media accessory.
Parameters <drive_id> - Enter the drive ID of the internal flash drive where the
file is to be copied from.
<pathname 64> - Enter the path and name of the file to be renamed.
unit <unit_id 1-12> - Select the switch in the switch stack where the
firmware image is to be copied to, denoted by unit ID number.
<drive_id> - Enter the drive ID of the internal flash drive where the
file is to be copied to.
Restrictions Only administrator-level users can issue this command.
Example usage:
To copy a file:
DGS-3600:4#copy c:/abc.cfg c:/def.txt
Command: copy c:/abc.cfg c:/def.txt
processing...100 %
Done!!
DGS-3600:4#
show boot_file
Purpose Used to show the currently set boot files located on the Switch.
Syntax
show boot_file {[unit <unitid 1-12> | all]}
Description This command is used to display the name and path of the firmware
image and configuration file that have been previously set up by the
user, as the boot up files.