Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
310
Command Parameters
delete pim register_checksum_include_data rp_address <ipaddr>
show pim register_checksum_include_data_rp_list
Each command is listed, in detail, in the following sections.
enable pim
Purpose Used to enable the PIM function on the Switch.
Syntax
enable pim
Description This command will enable PIM for the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Usage example:
To enable PIM as previously configured on the Switch:
DGS-3600:4#enable pim
Command: enable pim
Success.
DGS-3600:4#
disable pim
Purpose Used to disable PIM function on the Switch.
Syntax
disable pim
Description This command will disable PIM for the Switch. Any previously
configured PIM settings will remain unchanged and may be enabled at
a later time with the enable pim command.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Usage example:
To disable PIM on the Switch:
DGS-3600:4#disable pim
Command: disable pim
Success.
DGS-3600:4#