Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
306
show dvmrp nexthop
Purpose Used to display the current DVMRP routing next hop table.
Syntax
show dvmrp nexthop {ipaddress <network_address> | ipif
<ipif_name 12>}
Description This command will display the DVMRP routing next hop table.
Parameters
<ipif_name 12> − The name of the IP interface for which to display the
current DVMRP routing next hop table.
ipaddress <network_address> − The IP address and netmask of the
destination. The address and mask information can be specified using
the traditional format (for example, 10.1.2.3/255.0.0.0 or in CIDR format,
10.1.2.3/8).
Restrictions None.
Example usage:
To display DVMRP routing next hop table:
DGS-3600:4#show dvmrp nexthop
Command: show dvmrp nexthop
Source IP Address/Netmask Interface Name Type
----------------- --------------- ------
10.0.0.0/8 ip2 Leaf
10.0.0.0/8 ip3 Leaf
20.0.0.0/8 System Leaf
20.0.0.0/8 ip3 Leaf
30.0.0.0/8 System Leaf
30.0.0.0/8 ip2 Leaf
Total Entries: 6
DGS-3600:4#
show dvmrp
Purpose Used to display the current DVMRP settings on the Switch.
Syntax
show dvmrp {<ipif_name 12>}
Description The command will display the current DVMRP configurations.
Parameters
<ipif_name 12> − This parameter will allow the user to display DVMRP
settings for a specific IP interface.
Restrictions None.
Example usage:
To show DVMRP configurations: