Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
173
config igmp_snooping multicast_vlan_group
Purpose Used to add or remove multicast addresses to or from a previously created
Multicast VLAN.
Syntax
config igmp_snooping multicast_vlan_group <vlan_name 32> [add
multicast_range <range_name 32> | delete multicast_range
[<range_name 32> | all]]
Description This command allows users to configure the multicast group which will be
learned with the specific multicast VLAN.
Parameters
<vlan_name 32> − The name of the multicast VLAN for which IGMP
snooping is to be configured. This name may be up to 32 characters in
length.
add multicast_range <range_name 32> - Use this parameter to add a
multicast address or list of multicast addresses to this multicast VLAN as
defined by a range. This range was created using the limited multicast
address commands.
delete multicast_range <range_name 32> - Use this parameter to delete a
multicast address or list of multicast addresses to this multicast VLAN as
defined by a range. This range was created using the limited multicast
address commands.
all - Enter this parameter to remove all multicast addresses range names
from the selected multicast VLAN.
Restrictions Only administrator-level users can issue this command.
Example usage:
To add a multicast range to a previously created multicast VLAN:
DGS-3600:4# config igmp_snooping multicast_vlan_group trinity add
multicast_range 1
Command: config igmp_snooping multicast_vlan_group trinity add
multicast_range 1
Success.
DGS-3600:4#
show igmp_snooping multicast_vlan_group
Purpose Used to display the settings of a multicast VLAN group on the Switch.
Syntax
show igmp_snooping multicast_vlan_group {<vlan_name 32>}
Description This command allows you to display the settings of a multicast VLAN
group on the Switch.
Parameters
<vlan_name 32> − The name of the multicast VLAN to be displayed. This
name may be up to 32 characters in length.
Restrictions None.
Example usage:
To display a multicast VLAN: