Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
362
config authen_login
Switch.
! none – Adding this parameter will require no authentication to
access the Switch.
NOTE:
Entering none or local as an authentication
protocol will override any other authentication that
follows it on a method list or on the default method list.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the user defined method list “Trinity” with authentication methods TACACS, XTACACS and local, in that
order.
DGS-3600:4#config authen_login method_list_name Trinity method tacacs xtacacs local
Command: config authen_login method_list_name Trinity method tacacs xtacacs local
Success.
DGS-3600:4#
Example usage:
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that order:
DGS-3600:4#config authen_login default method xtacacs tacacs+ local
Command: config authen_login default method xtacacs tacacs+ local
Success.
DGS-3600:4#
delete authen_login method_list_name
Purpose Used to delete a previously configured user defined method list of
authentication methods for users logging on to the Switch.
Syntax
delete authen_login method_list_name <string 15>
Description This command is used to delete a list for authentication methods for
user login.
Parameters <string 15> - Enter an alphanumeric string of up to 15 characters to
define the given method list to delete.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the method list named “Trinity”:
DGS-3600:4#delete authen_login method_list_name Trinity
Command: delete authen_login method_list_name Trinity
Success.
DGS-3600:4#