Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
12
show switch
Purpose
Used to display general information about the Switch.
Syntax show switch
Description
This command displays information about the Switch.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To display the Switch’s information:
DGS-3600:4#show switch
Command: show switch
Device Type : DGS-3650 Gigabit Ethernet Switch
MAC Address : 00-10-20-33-45-00
IP Address : 10.58.44.77 (Manual)
VLAN Name : default
Subnet Mask : 255.0.0.0
Default Gateway : 0.0.0.0
Boot PROM Version : Build 1.10.B09
Firmware Version : Build 2.20.B35
Hardware Version : 1A1
System Name :
System Location :
System Contact :
Spanning Tree : Disabled
GVRP : Disabled
IGMP Snooping : Disabled
MLD Snooping : Disabled
RIP : Disabled
DVMRP : Disabled
PIM : Disabled
OSPF : Disabled
TELNET : Enabled (TCP 23)
WEB : Enabled (TCP 80)
RMON : Disabled
SSL status : Disabled
SSH status : Disabled
802.1x : Disabled
Jumbo Frame : Disabled
Clipaging : Disabled
MAC Notification : Disabled
Port Mirror : Disabled
SNTP : Disabled
DHCP Relay : Disabled
DNSR Relay : Disabled
VRRP : Disabled
HOL Prevention State : Disabled
Syslog Global State : Disabled
Single IP Management: Disabled
DGS-3600:4#