xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
39
create snmp community
Description
The create snmp community command is used to create an SNMP
community string and to assign access-limiting characteristics to this
community string.
Parameters
<community_string 32> − An alphanumeric string of up to 32 characters
that is used to identify members of an SNMP community. This string is used
like a password to give remote SNMP managers access to MIB objects in
the Switch’s SNMP agent.
view <view_name 32> − An alphanumeric string of up to 32 characters that
is used to identify the group of MIB objects that a remote SNMP manager is
allowed to access on the Switch.
read_only − Specifies that SNMP community members using the
community string created with this command can only read the contents of
the MIBs on the Switch.
read_write − Specifies that SNMP community members using the
community string created with this command can read from and write to the
contents of the MIBs on the Switch.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To create the SNMP community string “dlink:”
DGS-3600:4#create snmp community dlink view ReadView read_write
Command: create snmp community dlink view ReadView read_write
Success.
DGS-3600:4#
delete snmp community
Purpose
Used to remove a specific SNMP community string from the Switch.
Syntax delete snmp community <community_string 32>
Description
The delete snmp community command is used to remove a
previously defined SNMP community string from the Switch.
Parameters
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch’s SNMP agent.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To delete the SNMP community string “dlink:”
DGS-3600:4#delete snmp community dlink
Command: delete snmp community dlink
Success.
DGS-3600:4#