Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
360
show authen_policy
Syntax
show authen_policy
Description This command will show the current status of the access
authentication policy on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the system access authentication policy:
DGS-3600:4#show authen_policy
Command: show authen_policy
Authentication Policy: Enabled
DGS-3600:4#
create authen_login method_list_name
Purpose Used to create a user defined method list of authentication methods
for users logging on to the Switch.
Syntax
create authen_login method_list_name <string 15>
Description This command is used to create a list for authentication techniques
for user login. The Switch can support up to eight method lists, but
one is reserved as a default and cannot be deleted. Multiple method
lists must be created and configured separately.
Parameters <string 15> - Enter an alphanumeric string of up to 15 characters to
define the given method list.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create the method list “Trinity.”:
DGS-3600:4#create authen_login method_list_name Trinity
Command: create authen_login method_list_name Trinity
Success.
DGS-3600:4#
config authen_login
Purpose Used to configure a user-defined or default method list of authentication
methods for user login.
Syntax
config authen_login [default | method_list_name <string 15>]
method {tacacs | xtacacs | tacacs+ | radius | server_group <string
15> | local | none}
Description This command will configure a user-defined or default method list of
authentication methods for users logging on to the Switch. The sequence
of methods implemented in this command will affect the authentication
result. For example, if a user enters a sequence of methods like tacacs –
xtacacs – local, the Switch will send an authentication request to the first