Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
172
DGS-3600:4#config igmp_snooping multicast_vlan Trinity member_port
1:4-1:5 source_port 1:6 state enable
Command: config igmp_snooping multicast_vlan Trinity member_port 1:4-
1:5 source_port 1:6 state enable
Success.
DGS-3600:4#
delete igmp_snooping multicast_vlan
Purpose Used to delete a previously created multicast VLAN on the Switch.
Syntax
delete igmp_snooping multicast_vlan <vlan_name 32>
Description This command allows you to delete a previously created multicast VLAN
on the Switch.
Parameters
<vlan_name 32> − The name of the multicast VLAN to be deleted. This
name may be up to 32 characters in length.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create a multicast VLAN:
DGS-3600:4#delete igmp_snooping multicast_vlan Trinity
Command: delete igmp_snooping multicast_vlan Trinity
Success.
DGS-3600:4#
show igmp_snooping multicast_vlan
Purpose Used to display the settings of a multicast VLAN on the Switch.
Syntax
show igmp_snooping multicast_vlan {<vlan_name 32>}
Description This command allows you to display the settings of a multicast VLAN on
the Switch.
Parameters
<vlan_name 32> − The name of the multicast VLAN to be displayed. This
name may be up to 32 characters in length.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create a multicast VLAN:
DGS-3600:4#show igmp_snooping multicast_vlan Trinity
Command: snow igmp_snooping multicast_vlan Trinity
VID : 2 VLAN Name : trinity
Member Ports : 4-5
Source Ports : 6
Status : Enabled
Replace Source IP : 0.0.0.0
DGS-3600:4#