Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
318
show pim cbsr
Purpose Used to display the Candidate BSR settings of the switch, along with
CBSR parameters configured for the Switch.
Syntax
show pim cbsr {ipif <ipif_name12>}
Description This command will display the settings for Candidate BSRs that are
accessible to the switch. This command is for PIM-SM configurations
only.
Parameters <ipif_name 12> - Enter the name of the IP interface for which to
display settings. Entering no name will display all CBSRs.
Restrictions None.
Usage example:
To view the CBSR settings:
DGS-3600:4# show pim cbsr
Command: show pim cbsr
PIM Candidate-BSR Table
C-BSR Hash Mask Len : 30
C-BSR Bootstrap Period : 2
Interface IP Address Priority
--------------------- --------------------- ------------
Trinity 11.1.1.1/8 4
System 10.53.13.30/8 -1 (Disabled)
DGS-3600:4#
show pim
Purpose Used to display the PIM settings, along with PIM parameters configured
for the Switch.
Syntax
show pim {ipif <ipif_name12>}
Description This command will display the settings for the PIM function that are
accessible to the switch.
Parameters <ipif_name 12> - Enter the name of the IP address for which to display
settings. Entering no name will display all PIM IP interfaces.
Restrictions None.
Usage example:
To view the PIM settings: