Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
67
DGS-3600 Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 2.20-B35
Copyright(C) 2007 D-Link Corporation. All rights reserved.
DGS-3600:4#download configuration 10.41.44.44 c:\cfg\setting.txt
Command: download configuration 10.41.44.44 c:\cfg\setting.txt
Connecting to server................... Done.
Download configuration................. Done.
The very end of the autoconfig process including the logout appears like this:
DGS-3600:4#disable authen_policy
Command: disable authen_policy
Success.
DGS-3600:4#
DGS-3600:4##-------------------------------------------------------------------
DGS-3600:4## End of configuration file for DGS-3600
DGS-3600:4#
**********
* Logout *
**********
disable autoconfig
Purpose Use this to deactivate autoconfiguration from DHCP.
Syntax
disable autoconfig
Description This instructs the Switch not to accept autoconfiguration instruction from the
DHCP server. This does not change the IP settings of the Switch. The ipif
settings will continue as DHCP client until changed with the config ipif
command.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To stop the autoconfiguration function:
NOTE: With autoconfig enabled, the Switch ipif settings now define the Switch as a
DHCP client. Use the show switch command to display the new IP settings status.