Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
367
show authen_enable
refers to server groups defined by the user. Built-in Group refers
to the TACACS, XTACACS, TACACS+ and RADIUS security
protocols which are permanently set in the Switch. Keyword
refers to authentication using a technique INSTEAD of
TACACS/XTACACS/TACACS+/RADIUS which are local
(authentication through the local_enable password on the
Switch) and none (no authentication necessary to access any
function on the Switch).
Restrictions None.
Example usage:
To display all method lists for promoting user level privileges to administrator level privileges.
DGS-3600:4#show authen_enable all
Command: show authen_enable all
Method List Name Priority Method Name Comment
---------------- -------- --------------- ------------------
Permit 1 tacacs+ Built-in Group
2 tacacs Built-in Group
3 Darren User-defined Group
4 local Keyword
default 1 tacacs+ Built-in Group
2 local Keyword
Total Entries : 2
DGS-3600:4#
config authen application
Purpose Used to configure various applications on the Switch for
authentication using a previously configured method list.
Syntax
config authen application [console | telnet | ssh | http | all] [login
| enable] [default | method_list_name <string 15>]
Description This command is used to configure Switch configuration applications
(console, Telnet, SSH, HTTP) for login at the user level and at the
administration level (authen_enable) utilizing a previously configured
method list.
Parameters application – Choose the application to configure. The user may
choose one of the following five options to configure.
! console – Choose this parameter to configure the command
line interface login method.
! telnet – Choose this parameter to configure the Telnet login
method.
! ssh – Choose this parameter to configure the Secure Shell
login method.
! http – Choose this parameter to configure the web interface
login method.
! all – Choose this parameter to configure all applications
(console, Telnet, SSH, web) login method.
login – Use this parameter to configure an application for normal login