Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
91
config stp priority
Parameters priority <value 0-61440> - Select a value between 0 and 61440 to
specify the priority for a specified instance id for forwarding packets. The
lower the value, the higher the priority. This entry must be divisible by
4096.
instance_id <value 0-15> - Enter the value corresponding to the
previously configured instance ID for which to set the priority value. An
instance id of 0 denotes the default instance_id (CIST) internally set on
the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To set the priority value for instance_id 2 as 4096:
DGS-3600:4#config stp priority 4096 instance_id 2
Command : config stp priority 4096 instance_id 2
Success.
DGS-3600:4#
config stp mst_config_id
Purpose Used to update the MSTP configuration identification.
Syntax
config stp mst_config_id {revision_level <int 0-65535> | name
<string>}
Description This command will uniquely identify the MSTP configuration currently
configured on the Switch. Information entered here will be attached to
BPDU packets as an identifier for the MSTP region to which it belongs.
Switches having the same revision_level and name will be considered as
part of the same MSTP region.
Parameters revision_level <int 0-65535>– Enter a number between 0 and 65535 to
identify the MSTP region. This value, along with the name will identify
the MSTP region configured on the Switch. The default setting is 0.
name <string> - Enter an alphanumeric string of up to 32 characters to
uniquely identify the MSTP region on the Switch. This name, along with
the revision_level value will identify the MSTP region configured on the
Switch. If no name is entered, the default name will be the MAC address
of the device.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the MSTP region of the Switch with revision_level 10 and the name “Trinity”:
DGS-3600:4#config stp mst_config_id revision_level 10 name Trinity
Command: config stp mst_config_id revision_level 10 name Trinity
Success.
DGS-3600:4#