D-Link DGS-3600 Switch User Manual


 
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
260
DGS-3600:4#config sflow flow_sampler ports 1:1 rate 20000 maxheadersize 128
Command: config sflow flow_sampler ports 1:1 rate 20000 maxheadersize 128
Success.
DGS-3600:4#
delete sflow flow_sampler ports
Purpose Used to delete the flow sampler for the sFlow function of the switch.
Syntax delete sflow sflow_sampler ports [<portlist> | all]
Description This command will allow the user to delete the Switch’s flow sampler
settings.
Parameters <portlist> - Use this parameter to delete the ports that will be mined
for sFlow information.
all – Use this parameter to delete all ports to be mined for sFlow
information.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the sFlow flow sampler settings:
DGS-3600:4#delete sflow flow sampler ports all
Command: delete sflow flow sampler ports all
Success.
DGS-3600:4#
show sflow flow_sampler
Purpose Used to display the sFlow sampler information for the sFlow function
of the switch.
Syntax
show sflow flow_sampler
Description This command will allow the user to display the Switch’s sFlow flow
sampler information.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To show the sFlow flow sampler settings:
DGS-3600:4#show sflow counter_poller
Command:show sflow counter_poller
Port Analyzer Server ID Configured Rate Active Rate Max Header Size
-------- ------------------------- ----------------------- ------------------- ----------------------
1:1 1 10000 0 128
Total Entries : 1
DGS-3600:4#