Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
168
Success.
DGS-3600:4#
show igmp_snooping
Purpose Used to show the current status of IGMP snooping on the Switch.
Syntax
show igmp_snooping {vlan <vlan_name 32>}
Description This command will display the current IGMP snooping configuration
on the Switch.
Parameters
<vlan_name 32> − The name of the VLAN for which to view the IGMP
snooping configuration.
Restrictions None.
Example usage:
To show IGMP snooping:
DGS-3600:4#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Disabled
Multicast router Only : Disabled
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Host Timeout : 260
Router Timeout : 260
Leave Timer : 2
Querier State : Disabled
Querier Router Behavior : Non-Querier
State : Disabled
Fast Leave : Enabled
VLAN Name : vlan2
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Host Timeout : 260
Router Timeout : 260
Leave Timer : 2
Querier State : Disabled
Querier Router Behavior : Non-Querier
State : Disabled
Fast Leave : Enabled
Total Entries: 2
DGS-3600:4#