Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
371
delete authen server_host
Purpose Used to delete a user-defined authentication server host.
Syntax
delete authen server_host <ipaddr> protocol [tacacs | xtacacs |
tacacs+ | radius]
Description This command is used to delete a user-defined authentication
server host previously created on the Switch.
Parameters server_host <ipaddr> - The IP address of the remote server host to
be deleted.
protocol – The protocol used by the server host to delete. The user
may choose one of the following:
! tacacs – Enter this parameter if the server host utilizes the
TACACS protocol.
! xtacacs - Enter this parameter if the server host utilizes the
XTACACS protocol.
! tacacs+ - Enter this parameter if the server host utilizes the
TACACS+ protocol.
! radius - Enter this parameter if the server host utilizes the
RADIUS protocol.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete a user-defined TACACS+ authentication server host:
DGS-3600:4#delete authen server_host 10.1.1.121 protocol tacacs+
Command: delete authen server_host 10.1.1.121 protocol tacacs+
Success.
DGS-3600:4#
show authen server_host
Purpose Used to view a user-defined authentication server host.
Syntax
show authen server_host
Description This command is used to view user-defined authentication server hosts
previously created on the Switch.
The following parameters are displayed:
IP Address – The IP address of the authentication server host.
Protocol – The protocol used by the server host. Possible results will
include TACACS, XTACACS, TACACS+ or RADIUS.
Port – The virtual port number on the server host. The default value is 49.
Timeout - The time in seconds the Switch will wait for the server host to
reply to an authentication request.
Retransmit - The value in the retransmit field denotes how many times
the device will resend an authentication request when the TACACS
server does not respond. This field is inoperable for the tacacs+ protocol.
Key - Authentication key to be shared with a configured TACACS+ server
only.
Parameters None.
Restrictions None.