Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
222
delete 802.1x user
based or MAC-based Network Access control local users currently
configured on the Switch.
Parameters
<username 15> − A username can be as many as 15 alphanumeric
characters.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete 802.1x users:
DGS-3600:4#delete 802.1x user dtremblett
Command: delete 802.1x user dtremblett
Success.
DGS-3600:4#
create 802.1x guest_vlan
Purpose Used to configure a pre-existing VLAN as a 802.1x Guest VLAN.
Syntax
create 802.1x guest_vlan <vlan_name 32>
Description The create 802.1x guest_vlan command is used to configure a pre-
defined VLAN as a 802.1x Guest VLAN. Guest 802.1X VLAN clients
are those who have not been authorized for 802.1x or they haven’t
yet installed the necessary 802.1x software, yet would still like
limited access rights on the Switch.
Parameters <vlan_name 32> - Enter an alphanumeric string of no more than 32
characters to define a pre-existing VLAN as an 802.1x Guest VLAN.
This VLAN must have first been created with the create vlan
command mentioned earlier in this manual.
Restrictions Only administrator-level users can issue this command. This VLAN
is only supported for port-based 802.1x and must have already been
previously created using the create vlan command. Only one VLAN
can be set as the 802.1x Guest VLAN.
Example usage:
To configure a previously created VLAN as a 802.1x Guest VLAN for the Switch.
DGS-3600:4#create 802.1x guest_vlan Trinity
Command: create 802.1x guest_vlan Trinity
Success.
DGS-3600:4#
config 802.1x guest_vlan ports
Purpose Used to configure ports for a pre-existing 802.1x guest VLAN.
Syntax
config 802.1x guest_vlan ports [<portlist> | all] state [enable | disable]
Description The config 802.1x guest_vlan ports command is used to configure ports to
be enabled or disabled for the 802.1x guest VLAN.
Parameters <portlist> - Specify a port or range of ports to be configured for the 802.1x
Guest VLAN. The port list is specified by listing the lowest switch number