Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
253
enable sflow
Purpose Used to enable the sFlow function on the switch.
Syntax
enable sflow
Description This command, along with the disable sflow command, is used to
enable and disable the sFlow function on the switch without altering
configurations.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable the sFlow function:
DGS-3600:4#enable sflow
Command:enable sflow
Success.
DGS-3600:4#
disable sflow
Purpose Used to disable the sFlow function on the switch.
Syntax
disable sflow
Description This command, along with the enable sflow command, is used to
enable and disable the sFlow function on the switch without altering
configurations.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable the sFlow:
DGS-3600:4#disable sflow
Command:disable sflow
Success.
DGS-3600:4#
create sflow analyzer_server
Purpose Used to create the analyzer server for the sFlow functions.
Syntax
create sflow analyzer_server <value 1-4> owner <name 16>
{timeout <sec 1-2000000 | collectoraddress <ipaddr> |
collectorport <udp_port_number 1-65535> | maxdatagramsize
<value 300-1400>}
Description This command is used to create the remote sFlow Analyzer
(collector) that will be used to gather and analyze sFlow Datagrams
that originate from the Switch. Users must have the proper sFlow
software set on the Analyzer in order to receive datagrams from the