Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
74
DGS-3600:4#show attack_log index 1-2
Command: show attack_log index 1-2
Index Date Time Log Text
----- ---------------- ----------- ----------------------------------------------------
2 2006-04-25 12:38:00 Possible spoofing attack from 000d010023001 port 1:23
1 2006-04-25 12:37:42 Possible spoofing attack from 000d010023001 port 1:23
DGS-3600:4#
clear attack_log
Purpose Used to clear the switch history of attack log files.
Syntax
clear attack_log {[unit <unit_id 1-12> | all]}
Description This command will clear the contents of the attack log of the Switch.
Parameters unit <unit_id 1-12> - Select the switch in the switch stack for which
to clear attack log files.
all – Entering this parameter will clear all attack log files in the
switch stack.
Restrictions Only administrator-level users can issue this command.
Example usage:
To clear the attack log for all switches in the switch stack:
DGS-3600:4#clear attack_log all
Command: clear attack_log all
Success.
DGS-3600:4#
enable syslog
Purpose
Used to enable the system log to be sent to a remote host.
Syntax enable syslog
Description
The enable syslog command enables the system log to be sent to
a remote host.
Parameters
None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To the syslog function on the Switch:
DGS-3600:4#enable syslog
Command: enable syslog
Success.
DGS-3600:4#