AMD SC2200 Computer Hardware User Manual


 
278 AMD Geode™ SC2200 Processor Data Book
Core Logic Module - Audio Registers - Function 3
32580B
5 Low MPU I/O Trap. If this bit is enabled and an access occurs at I/O Port 300h-301h, an SMI is generated.
0: Disable.
1: Enable.
Top level SMI status is reported at F1BAR0+I/O Offset 00h/02h[1].
Second level SMI status is reported at F3BAR0+Memory Offset 10h/12h[0].
Third level SMI status is reported at F3BAR0+Memory Offset 14h[11].
4 Fast Path Read Enable/SMI Disable. When asserted, read Fast Path (an SMI is not generated on reads from specified
addresses).
0: Disable.
1: Enable.
In Fast Path Read the Core Logic module responds to reads of addresses: 388h-38Bh; 2x0h, 2x1, 2x2h, 2x3, 2x8 and 2x9h.
If neither sound card nor FM I/O mapping is enabled, then status read trapping is not possible.
3 FM I/O Trap. If this bit is enabled and an access occurs at I/O Port 388h-38Bh, an SMI is generated.
0: Disable.
1: Enable.
Top level SMI status is reported at F1BAR0+I/O Offset 00h/02h[1].
Second level SMI status is reported at F3BAR0+Memory Offset 10h/12h[0].
2 Sound Card I/O Trap. If this bit is enabled and an access occurs in the address ranges selected by bits [1:0], an SMI is
generated.
0: Disable.
1: Enable.
Top level SMI status is reported at F1BAR0+I/O Offset 00h/02h[1].
Second level SMI status is reported at F3BAR0+Memory Offset 10h/12h[0].
Third level SMI status is reported at F3BAR0+Memory Offset 14h[10].
1:0 Sound Card Address Range Select. These bits select the address range for the sound card I/O trap.
00: I/O Port 220h-22Fh 10: I/O Port 260h-26Fh
01: I/O Port 240h-24Fh 11: I/O Port 280h-28Fh
Offset 1Ah-1Bh Internal IRQ Enable Register (R/W) Reset Value: 0000h
15 IRQ15 Internal. Configures IRQ15 for internal (software) or external (hardware) use.
0: External.
1: Internal.
14 IRQ14 Internal. Configures IRQ14 for internal (software) or external (hardware) use.
0: External.
1: Internal.
13 Reserved. Must be set to 0.
12 IRQ12 Internal. Configures IRQ12 for internal (software) or external (hardware) use.
0: External.
1: Internal.
11 IRQ11 Internal. Configures IRQ11 for internal (software) or external (hardware) use.
0: External.
1: Internal.
10 IRQ10 Internal. Configures IRQ10 for internal (software) or external (hardware) use.
0: External.
1: Internal.
9 IRQ9 Internal. Configures IRQ9 for internal (software) or external (hardware) use.
0: External.
1: Internal.
8 Reserved. Must be set to 0.
Table 6-38. F3BAR0+Memory Offset: Audio Configuration Registers (Continued)
Bit Description