1
1-86
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
configure
Modify system configuration settings.
Syntax
configure
Availability Admin
Description Use this command to change the following system configuration
settings:
◆ Fabric parameters
◆ Virtual channel settings
◆ Switch Operating Mode
◆ Zoning Operation parameters
◆ RSCN Transmission Mode
◆ NS Pre-zoning Mode
◆ Arbitrated Loop parameters
◆ System services
◆ Portlog events enable
Do not run this command on an operational switch. First disable the switch
using the switchDisable command.
The configure command is navigated using a series of menus. Top-
level menus and associated submenus consist of a text prompt, a list
of acceptable values, and a default value (in brackets).
Use the following options to control input:
Return
When entered at a prompt with
no preceding input, accepts the
default value (if applicable) and
moves to the next prompt.
Interrupt (control-C)*
Aborts the command immediately
and ignores all changes made.