Filter
Top Products
1
1-156
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
fazoneDelete
Delete a Fabric Assist mode zone.
EMC does not support this command.
Syntax fazoneDelete “fazoneName”
Availability Admin
Description Use this command to delete an existing Fabric Assist mode zone on a
fabric.
This command does not change the defined configuration (which you
can view using the
cfgShow command) until the cfgSave command
is issued. For the change to become effective, an appropriate Fabric
Assist zone configuration must be enabled using the
cfgEnable
command. For the change to be preserved across switch reboots, it
must be saved to non-volatile memory using the
cfgSave command.
Operand The following operand is required:
Example
To delete a Fabric Assist zone:
switch:admin> fazoneDelete “Blue_fazone”
See Also fazoneCreate
faShow
faStatsShow
fazoneName
Specify the name of the zone to be deleted,
in quotation marks.