Filter
Top Products
1
1-380
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
qloopDelete
Delete a QuickLoop.
EMC does not support this command.
Syntax qloopDelete "qloopName"
Availability Admin
Description Use this command to delete a QuickLoop.
This command changes the Defined Configuration. For the change to
be preserved across switch reboots, it must be saved to non-volatile
memory using the
cfgSave command. For the change to become
effective, an appropriate zone configuration must be enabled using
the
cfgEnable command.
This command requires a Zoning license.
Operands The following operand is required:
Example
To delete QuickLoop “qloop2”:
switch:admin> qloopDelete "qloop2"
See Also qloopAdd
qloopCreate
qloopRemove
qloopShow
qloopname
Specify the name of QuickLoop, in quotation
marks. This operand is required.