Filter
Top Products
1
filterTest
1-161
Telnet Commands
filterTest
Run frame filter test for 3000 ASICs.
Syntax
filterTest [-passcnt passcnt][-txports list][-scamoff
offset] [-dcamoff offset][-fdefoff offset]
Availability Admin
Description Use this command to verify that the 3000 ASIC frame-level filtering
logic includes every type of filter actions:
◆ FLTACT_LIST_A — action to handle the subgroup A based
filtering
◆ FLTACT_LIST_B — action to handle the subgroup B based
filtering
◆ FLTACT_FROZEN — action to handle the frame frozen process
◆ FLTACT_DISCARD — action to discard frame
◆ FLTACT_FORWARD — action to forward frame
This command can be run on every port, and send the frame in
internal loop back mode. The filter test requires two different ports in
the same quadrant because the filter logic sits in a transmitter port
and cannot work if the frame is sent directory from the embedded
port.
In this test, the filter definition covers the different filtering
conditions shown in Table 1-10:
Table 1-10 Filtering Conditions
Number Filter Definition
0 unconditional match
1 unconditional match
2 unconditional match
3 unconditional match
4 unconditional match
5 SCAM no match and ALPA match
6 SCAM&DCAM match and ALPA match