Filter
Top Products
1
diagloopid
1-117
Telnet Commands
diagloopid
Set the diagnostics loop ID.
Syntax
diagloopid [id | -show]
Availability Admin
Description Use this command to select the loop ID to be used by FL mode
diagnostics. The value entered will be converted from a loop ID to the
corresponding ALPA and used as the port address for any
diagnostics that operate in FL port mode.
The mode becomes active as soon as this command is executed. It
does not require a reboot to take effect.
Operands This command has the following operands:
If no operand is specified the current value is displayed.
Example
To change the loop ID from 125 to 120:
switch:admin> diagloopid
FL mode Loop ID is 125.
switch:admin> diagloopid 120
FL mode Loop ID is now 120.
Config update Succeeded
switch:admin>
See Also diaghelp
id
Specify the loop ID for FL mode diagnostics.
This operand is optional.
-show
Specify this operand to display the current
loop ID. This operand is optional.