Filter
Top Products
1
sensorShow
1-391
Telnet Commands
Example The output of this command is different between v3.0 and v4.0.
Below is an example of the output of this command from v4.0:
switch40:admin> sensorshow
sensor 1: (Temperature) is Ok, value is 32 C
sensor 2: (Temperature) is Absent
sensor 3: (Temperature) is Ok, value is 44 C
sensor 4: (Temperature) is Absent
sensor 5: (Temperature) is Ok, value is 40 C
sensor 6: (Temperature) is Absent
sensor 7: (Fan ) is Ok, speed is 3125 RPM
sensor 8: (Fan ) is Ok, speed is 2986 RPM
sensor 9: (Fan ) is Ok, speed is 3013 RPM
sensor 10: (Power Supply ) is Ok
sensor 11: (Power Supply ) is Ok
sensor 12: (Power Supply ) is Absent
sensor 13: (Power Supply ) is Ok
switch40:admin>
See Also fanShow
tempShow