Filter
Top Products
1
configure
1-91
Telnet Commands
The Virtual Channel Setting fields as show in Table 1-4:
Switch Operating
Mode
The functionality of this parameter is currently not supported.
Zoning Operation
Parameters
The Zoning Operation Parameter fields are as follows:
Standard Mode
Specify 1 to force the switch to issue interswitch traffic conforming to
FCSW, or specify 0 to enable proprietary interswitch traffic. The
default value is 0. This value must be set to 1 for interoperability.
Disable NodeName Zone Checking
Specify 1 to disable using Node WWN when specifying nodes in the
zone database, or specify 0 to enable using Node WWN when
specifying nodes in the zone data. The default value is 1. This value
must be set to 1 for interoperability.
RSCN Transmission
Mode
The RSCN Transmission Mode fields is as follows:
End-device RSCN Transmission Mode
Specify 0 for RSCN with single PID, 1 for RSCN with multiple PIDs,
or 2 Fabric RSCN. The default value is 0.
Table 1-4 Configure Command Virtual Channel Settings
Field Default Range
VC Priority 2
22 to 3
VC Priority 3
22 to 3
VC Priority 4
22 to 3
VC Priority 5
22 to 3
VC Priority 6
32 to 3
VC Priority 7
32 to 3