Filter
Top Products
1
1-214
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
Operands This command has the following operands:
When no slot number and port number are specified, this command
displays the interface information for all ports on the switch
(including non E_Ports).
Example
To display FSPF interface information:
switch:admin> interfaceshow 7/5
idbP = 0x10057718
Interface 5 data structure:
nghbP = 0x1005a510
ifNo = 5
masterPort = 4
defaultCost = 500
cost = 500
delay = 1
lastScn = 8
lastScnTime = Aug 06 09:02:44.019
upCount = 42
lastUpTime = Aug 06 08:52:41.272
downCount = 42
lastDownTime = Aug 06 08:57:47.097
downReason = 2
iState = DOWN
switch:admin>
slotnumber
Specify the slot number in an ED-12000B switch.
The slot number must be followed by a slash ( / )
and the port number.
The ED- 12000B has a total of 10 slots counted
from 1 to 10. Slot number 5 and 6 are control
processor cards, and slot 1 through 4 and 7
through 10 are switch cards. On each switch card,
there are 16 ports counted from the bottom 0 to 15.
A particular port must be represented by both slot
number (1 through 4 or 7 through 10) and port
number (0 through 15).
This operand is not required for switches that do
not have blades.
portnumber
Specify a port number. Valid values for port
number vary depending on the switch type. This
operand is optional.