EMC DS-32B2 Switch User Manual


 
1
1-250
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
msCapabilityShow
Display the management server capability.
Syntax
msCapabilityShow
Availability All users
Description Use this command to query a fabric for the Management Server
capability. Based on the result of this command, you can then decide
whether to activate the Platform service on all switches in the fabric.
When this command is issued, information is gathered from every
switch of the fabric, and each switchs ability to handle the Platform
service is displayed.
Platform service is available in firmware v2.3 and above. Lower-level
firmware releases do not support it.
Operands None
Example
To display Management Server capability on a fabric:
switch:admin> msCapabilityShow
Switch WWN Capability Switch Name
======================== ========== ===========
10:00:00:60:69:80:02:22 0x0000008f "swd83"*
Capability Bit Definitions:
Bit 0: Basic Config Service Supported.
Bit 1: Platform Management Service Supported.
Bit 2: Topology Discovery Service Supported.
Bit 3: Unzoned Name Service Supported.
Bit 4: M.S. Fabric Zone Service Supported.
Bit 5: Fabric Lock Service Supported.
Bit 6: Timer Service Supported.
Bit 7: RSCN Small Payload Supported.
Others: Reserved.
Done.
switch:admin>