Filter
Top Products
1
1-148
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
fanEnable
Enable a fan unit.
Syntax
fanEnable unit
Availability Admin
Description Use this command to set the fan unit back to the default RPM speed
only if the fan unit has been previously disabled using the
fanDisable command.
Operand This command has the following operand:
Example
To enable a fan that has been disabled:
switch:admin> fanenable 1
Fan unit 1 has been enabled
switch:admin> fanshow
Fan #1 is OK, speed is 2237 RPM
Fan #2 is OK, speed is 2537 RPM
Fan #3 is OK, speed is 2463 RPM
See Also fanShow
fanDisable
unit
Specify the fan’s unit number. View the fan unit
numbers using the
fanShow command. This
operand is required.