Filter
Top Products
1
1-338
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
portLogDump
Display the port log without page breaks.
Syntax
portLogDump [count[, saved[, portid]]]
Availability All users
Description Use this command to display the port log, listing all entries in the log
without page breaks. This command displays the same information
as
portLogShow, but portLogShow prompts the user to press ENTER
between each page.
Refer to
portLogShow for a description of the port log.
If the port log is disabled, the following message appears as the first
line (see portLogClear for details):
WARNING: port log is disabled
Operands This command has the following operands:
count
Specify the maximum number of lines to be
displayed. Only the most recent count entries are
displayed. This operand is optional.
saved
Specify a nonzero value to display the saved port
log from the last switch fault. Refer to
uptime for
conditions that cause a fault. count is ignored
when displaying the saved log. This operand is
optional.
portid
Specify the port to be displayed. All other ports
will not be displayed. This operand is optional.