Filter
Top Products
1
1-354
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
portRouteShow
Display routing tables for a port.
Syntax
portRouteShow [slotnumber/]portnumber
Availability All users
Description Use this command to display the port address ID and the contents of
the port routing tables as shownin Table 1-27:
Table 1-27 Port Routing Table
Port Address ID Description
External
unicast
routing
table
Shows unicast frame routing to another switch element
in the fabric. Output format is
domain_number: ports_bitmap
where:
domain_number is the switch element number that a
unicast frame can reach from the portnumber port.
ports_bitmap contains all output ports, in bitmap hex
format, that can forward unicast frames from port
number to domain number.
This table contains at least one entry for each active port:
local_switch_domain_number: 0x10000
This is for routing unicast frames designated to the
embedded port of the local switch element.
Internal
unicast
routing
table
Lists all ports in the local switch that a unicast frame can
reach from portnumber. Format is
destination_port: output_ports_bitmap
Because the destination_port is in the local switch,
output_ports_bitmap usually contains one bit with a bit
position number representing the
destination_port
number.