Filter
Top Products
1
1-482
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
Specify a QuickLoop AL_PA as a QuickLoop name followed by a list
of AL_PAs, for example "qloop1[01,02]". QuickLoop names have the
same format as zone names, and are created with the
qloopCreate
command to define a switch or pair of switches that form the
QuickLoop.
Specify a zone alias name using the same format as a zone name. It is
created with the
aliCreate command. The alias must resolve to a list
of one or more of the following:
• For v3.0, a switch domain and physical port number pair.
• For v4.0, a switch domain and port area number pair. View the
area numbers for ports using the
switchShow command.
• World Wide Names.
• QuickLoop AL_PAs.
The types of zone members used to define a zone may be mixed. For
example, a zone defined with the following members: "2,12; 2,14’
10:00:00:60:69:00:00:8a" would contain all devices connected to switch
2, ports 12 and 14, and to the device with the World Wide Name
"10:00:00:60:69:00:00:8a (either node name or port name), at the port
in the fabric to which it is connected.
Use this command to create a broadcast zone. This is a special zone used to
specify those nodes that can receive broadcast traffic. Broadcast traffic is
usually meant for servers and not for storage devices. This zone must be
named "broadcast". Only one broadcast zone can exist within a fabric.This
type of zone is hardware enforced; the switch controls data transfer to a port.