1
1-154
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
A Fabric Assist host member is defined by wrapping the physical
fabric port or a physical device (a WWN) between “H{” and “}”. For
example, “H{5,6}” or “H{10:00:00:60:69:00:00:8a}” is a Fabric Assist
host. The type of Fabric Assist zone members used to define a Fabric
Assist zone may be mixed and matched. For example, a Fabric Assist
zone defined with the following members: “2,12; 2,14;
10:00:00:60:69:00:00:8a” would contain devices connected to switch 2,
ports 12 and 14, and the device with a WWN of
“10:00:00:60:69:00:00:8a” (either node name or port name - whichever
port in the fabric it is connected to).
This command does not change the defined configuration (which you can
view using the cfgShow command) until the cfgSave command is issued.
For the change to become effective, an appropriate Fabric Assist zone
configuration must be enabled using the cfgEnable command. For the
change to be preserved across switch reboots, it must be saved to nonvolatile
memory using the cfgSave command.
Operands The following operands are required:
fazoneName
Specify the name for the Fabric Assist zone.
The name must be enclosed in quotation
marks. This operand is required.
member
Specify a member or list of members to add
to a Fabric Assist zone. The list must be
enclosed in quotation marks, and each
member must be separated by a semicolon.
A member can be specified by one or more
of the following methods:
◆ Enter a fabric domain and area number
pair. View the area numbers for ports
using the
switchShow command.
◆ WWNs.
◆ Fabric Assist zone alias names.
◆ Exactly one Fabric Assist host member.
This operand is required.