Filter
Top Products
1
minisregshow
1-249
Telnet Commands
minisregshow
Display port registers for a specified miniswitch.
Syntax
minisregshow [slot/]mini_switch {filter}
Availability All users
Description Use this command to display the ASIC register contents for the
specified miniswitch on the specified blade shot.
Operands This command has the following operands:
Example
To view the port registers for blade 8:
switch12k:admin> minisregshow 8/1
Looking for port 29 in path: /proc/fabos/blade/8
Found file: /proc/fabos/blade/8/1/1/5/asic29/reg
Port Registers for slot: 8, port: 29
0xca83b000: chip_id 0104 0xca83b002: port_config 0a38
0xca83b004: did_vc_map 0800 0xca83b008: int_mask 264f
0xca83b00a: int_status 1020 0xca83b00c: err_status 0002
<output truncated>
See Also minispropshow
slot
Specify the slot of the blade for which you want
to view the port registers for. This operand is
optional.
mini_switch
Specify the index of the mini within the blade
to be displayed. This operand is required.
filter
Specify filter criteria for the port registers to be
displayed. This operand is optional.