Filter
Top Products
1
1-436
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
switchReboot
Halt and bring down the operational switch.
Syntax
switchReboot
Availability Admin
Description Use this command to reboot the operational switch without
disrupting the other switch in the ED-12000B chassis. Use this
command whenyou cannot determine the problem with the switch
and want to bring it back to an operational state with out disturbing
the software state of the system in general.
This command is equal to running
switchShutdown and
switchStart.
For the ED-12000B, the switchreboot command will reboot only the
logical switch you are currently logged in to, the other logical switch and
both CPs remain unaffected.
Operands None
Example
To bring down an operational switch:
switch12000:admin> switchreboot
switch12000:admin> Selecting i2c bus...Done.
Stopping all switch daemons...Done.
Releasing i2c bus...Done.
Powering off slot 2...Done.
Powering off slot 4...Done.
Checking all slots are powered off....Done.
Cleaning up kernel modules...Done.
Initializing kernel modules...Done.
setup FCIP IP: ifconfig fc1 ip=192.168.69.190, netmask=255.255.255.0
Starting all switch daemons... fabricd zoned fspfd nsd msd asd psd fcpd evmd err
logd track_changes webd snmpstartd fwdDone.
Powering on slot 2...Done.
Powering on slot 4...Done.
Checking diagnostics........................
.See Also switchShutdown
switchStart