Filter
Top Products
1
fazoneAdd
1-151
Telnet Commands
fazoneAdd
Add a member to a Fabric Assist zone.
EMC does not support this command.
Syntax fazoneAdd “fazoneName”,“member; member”
Availability Admin
Description Use this command to add one or more members to an existing Fabric
Assist zone.
This command does not change the defined configuration (which you
can view using the
cfgShow command) until the cfgSave command
is issued. For the change to become effective, an appropriate Fabric
Assist zone configuration must be enabled using the
cfgEnable
command. For the change to be preserved across switch reboots, it
must be saved to nonvolatile memory using the
cfgSave command.
Operands This command has the following operands:
fazoneName
Specify the name for the Fabric Assist zone
in quotation marks. This operand is
required.
member
Specify a list of Fabric Assist zone
members. The list must be enclosed in
quotation marks, and each member must be
separated by a semicolon. A member can be
specified by one or more of the following
methods:
◆ Enter a fabric domain and area number
pair. View the area numbers for ports
using the
switchShow command.
◆ WWNs.
◆ Fabric Assist zone alias names.
◆ Exactly one Fabric Assist host member.
This operand is required.