Filter
Top Products
1
configure
1-87
Telnet Commands
Fabric Parameters There are a number of settings that control the overall behavior and
operation of the fabric. Some of these values, such as the domain, are
assigned automatically by the fabric and may differ from one switch
to another in the fabric. Other parameters, such as the BB-credit, can
be changed for specific applications or operating environments, but
must be in agreement among all switches to allow formation of the
fabric.
The fabric parameters are shown in Table 1-3:
End-of-file (control-D)*
When entered at a prompt with
no preceding input, terminates
the command and saves changes
made.
* However, on many computers the settings could be different.
Table 1-3 Configure Command Fabric Parameters
Field Default Range
Domain
11 to 239
BB Credit
16 1 to 16
R_A_TOV
10000 4000 to 120000
E_D_TOV
2000 1000 to 5000
Data Field Size
2112 256 to 2112
Sequence Level Switching
00 or 1
Disable Device Probing
00 or 1
Suppress Class F Traffic
00 or 1
SYNC IO mode
00 or 1
VC Encoded Address Mode
00 or 1
Core Switch PID Format
00 or 1
Per-frame Route Priority
00 or 1
Long Distance Fabric
00 or 1