Filter
Top Products
1
topologyShow
1-461
Telnet Commands
Operand This command has the following operand:
Out Port:
Area number of the port that incoming frame will be
forwarded to, in order to reach the destination
domain. Use the
switchshow command to view the
area numbers for the switch.
In Ports:
Area number of the input ports that use the
corresponding Out Port to reach the destination
domain. This is the same information provided by
portRouteShow and uRouteShow. Use the
switchshow command to view the area numbers for
the switch.
Total
Bandwidth:
The maximum bandwidth of the out port.
Bandwidth
Demand:
The maximum bandwidth demand by the in ports.
Flags:
Always D, indicating a dynamic path. A dynamic
path is discovered automatically by the FSPF path
selection protocol.
Table 1-33 TopologyShow Fields (continued)
Field Description
domainnumber
Specify the destination domain for which
topology information is to be displayed. This
operand is optional. When no domain number is
specified, this command displays the topology
information of all the domains in the fabric.