EMC DS-32B2 Switch User Manual


 
1
1-262
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
nbrStatsClear
Reset FSPF interface counters.
Syntax
nbrStatsClear [slotnumber/][portnumber]
Availability All users
Description Use this command to reset the counters of FSPF frames transmitted
and received on an interface.
Use this command with no operand to reset counters on all interfaces.
Operands This command has the following operands:
When this command is specified with no operand, the statistics are
cleared for all interfaces.
slotnumber
Specify the slot number in an ED-12000B
switch. The slot number must be followed by
a slash ( / ) and the port number.
The ED-12000B has a total of 10 slots counted
from 1 to 10. Slot number 5 and 6 are control
processor cards, and slot 1 through 4 and 7
through 10 are switch cards. On each switch
card, there are 16 ports counted from the
bottom 0 to 15. A particular port must be
represented by both slot number (1 through 4
or 7 through 10) and port number (0 through
15).
This operand is not required for switches that
do not have blades.
portnumber
Specify the port number for the counters to be
reset. Valid values for port number vary
depending on the switch type. This operand is
optional.