Filter
Top Products
1
1-316
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
Example The following example configures sblade 2, port 3 as a locked G_Port:
switch:admin> portCfgGport 2/3, 1
done.
See Also portShow
switchShow
configure
portCfgShow
portnumber
Specify the port number to be configured. Valid
values for port number vary depending on the
switch type. This operand is required.
mode
Specify a value of 1 to designate the port as a
G_Port. Specify a value of 0 to remove the G_Port
designation from the port. This is the default port
state. This operand is required.