1
1-120
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
diagretry
Enable or disable retry mode.
Syntax
diagretry [mode | -show]
Availability Admin
Description Use this command to enable or disable retry mode. The mode is
saved in nonvolatile memory and stays in that mode until the next
execution of
diagretry.
The mode becomes active as soon as this command is executed. It
does not require a reboot to take effect.
When enabled, retry mode modifies the behavior of the diagnostic
test methods, POST, and burn-in scripts. The exact behavior
depends on the tests and scripts that are run, but the most common
result is that
spinsilk tests are skipped when retry mode is enabled.
Operands This command has the following operands:
If no operand is specified, the current value is displayed.
Example
To view the current retry mode value:
switch:admin> diagretry
Retry disable mode is 0 (Enabled).
See Also diagHelp
mode
Specify 1 to enable retry mode; specify 0 to
disable retry mode. This operand is optional
-show
Specify this operand to display the current
mode. This operand is optional.