1
nsShow
1-269
Telnet Commands
There may be additional lines if the device has registered any of the
following information (the switch automatically registers SCSI
inquiry data for FCP target devices):
◆ FC4s supported
◆ IP address
◆ IPA
◆ Port and node symbolic names
◆ Fabric port name
◆ Hard address and/or port IP address
Operands None
Example
To display local name server information:
switch:admin> nsShow
}The Local Name Server has 1 entry {
Type Pid COS PortName NodeName TTL(sec)
N 060300; 2,3;10:00:00:00:c9:24:0d:b3;20:00:00:00:c9:24:0d:b3; na
FC4s: FCP
Fabric Port Name: 20:03:00:60:69:00:54:e9
See Also nsAllShow
switchShow