Filter
Top Products
1
fanDisable
1-147
Telnet Commands
fanDisable
Disable a fan unit.
Syntax
fanDisable unit
Availability Admin
Description Use this command to disable a nonfaulty fan unit by setting the RPM
speed to 0.
Operand This command has the following operand:
Example
To disable a fan unit:
switch:admin> fandisable 1
Fan unit 1 has been disabled
switch:admin> fanshow
Fan #1 is OK, speed is 0 RPM
Fan #2 is OK, speed is 2537 RPM
Fan #3 is OK, speed is 2463 RPM
switch:admin>
See Also fanShow
fanEnable
unit
Specify the fan’s unit number. View the fan unit
numbers using the
fanShow command. This
operand is required.