Filter
Top Products
1
portRouteShow
1-355
Telnet Commands
Multicast
routing
table
Shows multicast frame routing to the destination
multicast group. Output format is:
mcast_group_number: (mcast_group_id)
ports_bitmap
where
mcast_group_number is the multicast group number.
mcast_group_id is the multicast frame destination ID.
ports_bitmap is a hex bitmap of all output port numbers
that can forward a multicast frame from the portnumber
to
mcast_group_id.
Broadcast
routing
table
A bitmap, containing all ports reachable by a received
broadcast frame. Bit 16 of the bitmap is always set to
allow the switch element to receive broadcast frames.
Table 1-27 Port Routing Table (continued)
Port Address ID Description
External
unicast
routing
table
Shows unicast frame routing to another switch element
in the fabric. Output format is
domain_number: ports_bitmap
where:
domain_number is the switch element number that a
unicast frame can reach from the portnumber port.
ports_bitmap contains all output ports, in bitmap hex
format, that can forward unicast frames from port
number to domain number.
This table contains at least one entry for each active port:
local_switch_domain_number: 0x10000
This is for routing unicast frames designated to the
embedded port of the local switch element.